GPS E-Lock for Trucks, Containers and Tankers

The Yekkada GL600 is a GPS e-lock that locks a truck, container or tanker door and reports where it is, every time it's opened or closed. You can unlock it remotely from the Yekkada dashboard or by SMS password, or on the spot with an authorised RFID card or Bluetooth when there's no network.

Every lock and unlock is stamped with GPS location and time, so you have proof of where the cargo was opened, and by whom.

Request a demo Call +91 7406 646464

10,400 mAhBattery
6–7 daysBattery life per charge
IP67Waterproofing
50+RFID cards per lock

How the GL600 works on a trip

  1. Lock the door with the steel cable (GL600 GPS Lock) or the hard shackle (GL600 Cargo Lock).
  2. Assign the lock to a fleet trip in Yekkada. A lock on one active trip can't be added to another by mistake.
  3. Track it live on the map. If the truck enters a no-network zone, the lock saves location and sensor data and sends it once it's back in coverage.
  4. Unlock at the destination remotely, or with an authorised RFID card on site. The unlock is logged with GPS location.
  5. Review the trip in reports: route, stops, every lock event and its location.

Two versions

GL600 GPS LockGL600 Cargo Lock
LockingSteel cable (soft lock rope)Hardened shackle (hard lock hook)
Best forContainer doors, tanker valves, trailer latches with awkward haspsVan and box-truck doors, standard hasps
Rope-cut alarmYes, with short-circuit-proof ropeNot applicable
Everything elseSame electronics, battery and unlock methodsSame

Four ways to unlock

  • Yekkada web dashboard or mobile app
  • SMS password, from an authorised number
  • RFID card on the spot. Works without a cellular network. One lock accepts more than 50 cards.
  • Bluetooth from an authorised phone

Alerts you get

  • Door or lock opened and closed, with GPS location
  • Lock rope cut
  • Back case cover opened (vandalism)
  • Rope not pulled in properly after locking (reminder)
  • Low battery
  • Temperature high or low
  • Geofence entry and exit
  • Movement detected (built-in G-sensor)

Specifications

Connectivity

Network
2G / 3G / 4G, dual SIM slots
GSM bands
850 / 900 / 1800 / 1900 MHz
Positioning
GPS + BeiDou
Commands
SMS or network

Power

Battery
10,400 mAh rechargeable
Battery life per charge
6 to 7 days at the default reporting interval
Average working current
Under 90 mA

Durability & build

Waterproofing
IP67, dust- and water-proof
Working temperature
−20 °C to +60 °C
Storage temperature
−40 °C to +80 °C
Size
16.5 × 11.5 × 4.5 cm
Weight
1.1 kg
Mounting
Strong magnet on the back, anti-theft screw

Data & updates

Blind-zone storage
Yes, uploads when coverage returns
Firmware
Over-the-air updates; micro-USB for setup

Where it's used

  • Containers moving between port, CFS and warehouse
  • Tankers carrying fuel, chemicals or edible oil, where valve tampering is the risk
  • Box trucks and trailers carrying FMCG, electronics or pharma
  • Confidential material that needs a locked, tracked chain of custody from dispatch to delivery

One dashboard for locks and trackers

The GL600 runs on the same Yekkada dashboard as your GPS trackers, Bluetooth locks and Track Point phones. You can see every device on one map, run trips from Fleet Trips, and check the Audit Trail for who unlocked what, where and when.

What you buy

Most customers buy the GL600 lock with a Yekkada subscription. If you already own supported GL600 locks, you can take the Yekkada platform on its own. Ask for a quote.

Can the lock be opened without a network?

Yes. An authorised RFID card or Bluetooth unlocks it on the spot. The event is stored and uploaded when the lock is back in coverage.

What happens if someone cuts the cable?

The GL600 raises a rope-cut alarm immediately, with location. Opening the back case cover raises a separate tamper alarm.

Does it work on tankers?

Yes. The cable version fits tanker valve and manhole locking points that a shackle can't reach.

How long does the battery last?

6 to 7 days on one charge at the default reporting interval. The 10,400 mAh battery recharges through the charging port.

Can I use Yekkada with GL600 locks I already have?

Yes, supported GL600 locks can be added to a Yekkada platform subscription.

Do I need separate software?

No. The GL600 is managed in Yekkada on the web and the mobile app, along with any other Yekkada devices.

Where do you supply?

India and Kenya.

Talk to us about securing your trips. Request a demo or call +91 7406 646464.